Nilight – ZH006 LED Light Bar 20 Inch 126W Spot Flood Combo Led Off Road Lights with 16AWG Wiring Harness Kit-One Lead, 2 Years Warranty
$28.85
Related Products
Product description
20Inch 126W Spot Flood Led Light Bars with Wiring Harness Kit-1 Lead
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. hero-video Merchant Video
Strictly Test : we persevere in rigorous tests on the strength, durability, visibility as well as longevity of the material to make sure that consumers receive high-performance products
Product structure 
126W (42 x 3W High Intensity LED) Beam Pattern: Flood Spot, Lumen: 8820LMMaterial: 6063 Aluminum Profile, High quality Led Chips, PC Lens.LED Color Temperature: Pure White 6000K-6500K.Input Voltage: 9-30V DC (fits 12V vehicles) , Lifespan: Over 50, 000 hours,Certifications: CE, FCC, RoHS
Key Features 
Heat dissipation
10pcs Cooling fans and High quality Die-casting Alu housing fast heat-dissipation.
IP67 Improve Waterproof Design
The waterproof rubber pad and silicone sealing strip as the second protection the light better handle different kinds of weather
Advanced Chip Techs
High-quality LED chips emit bright and white light. Its perfect combination of flood beams provides wide-spread illumination, light up the darkness.
Adjustable Bracket
Adjustable mounting bracket makes changing direction of light beam easily.
Strictly Test : 
Temperature & Humidity Test
To ensure that the unit can withstand a wide range of temperature without reduce light output safety.
Working Temperature: -40~85 degrees Celsius
Dust Test
To ensure the unit is preperly sealed against harmfull road dust and debris.
Salt Spray Test
To ensure that the unit can withstand against oxidation caused by salt on the coastal area and from winter condition.
Moisture Test
To ensure that the unit do not cause moisture buildup leading to reduce visibility.
Power 3Pin Rocker Switch
It is designed for easy control of LED lights, also illuminates charming red to decorate your car.
Automotive Relay
Operating Voltage: 12V DC Power
The relay is made with conductive pins. It effectively protect the circuit and the lighting system.
More scientific and safer
Max Wattage: 180W, Max Ampere: 15A
Fuse acts as the first Line of defense against overcurrent or short circuits to protect the circuit.
1 Wiring Diagram
2 Rocker Switch
3 Relay
4 Inline blade fuse
5 Premium Material Wire
Upgrade the light save your way in the darkness, rain, and foggy weather 
Off-Road Vehicles: sand rail, buggy, ATV, SUV, truck, train, motorbike, bus, tank, etc.Engineering Vehicles: excavator, Dozer, road roller, Tractor, Harvester, Grain Drill, Mower, Snowplow, bulldozer, crane, forklift, etc.Others: boat, fishing, courtyard lamp, yacht, road/ street lamp, etc.
Related products
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.6 out of 5 stars 9,176
4.7 out of 5 stars 903
4.2 out of 5 stars 65
4.6 out of 5 stars 3,807
4.4 out of 5 stars 2,764
4.6 out of 5 stars 2,363
4.6 out of 5 stars 3,144
Price
$53.99$53.99
$44.99$44.99
$13.49$13.49
$38.99$38.99
$98.99$98.99
$24.79$24.79
$49.99$49.99
Package Includes
1PCS 126W LED Light Bar
20 Inch 126W LED Light Bar
1PC 20 Inch Light Yellow Cover
4PCS 18W LED Pods
2PCS 18W LED Pods
12 Inch LED Light Bar
2PCS 60W LED Pods
Package Includes
1PC Black Cover
Wiring Harness -1 Lead
—
Wiring Harness -4 Leads
Wiring Harness -3 Leads
Wiring Harness -1 Lead
Wiring Harness -3 Leads
Package Includes
1PC Yellow Cover
—
—
—
52 Inch LED Light Bar
—
12 Inch LED Light Bar
LED Color Temperature
6000K-6500K/2500K-3000K
Pure White 6000K-6500K.
/
Pure White 6000K-6500K.
Pure White 6000K-6500K.
Pure White 6000K-6500K.
Pure White 6000K-6500K.
Input Voltage
9-30V DC (fits 12V vehicles)
9-30V DC (fits 12V vehicles)
/
9-30V DC (fits 12V vehicles)
9-30V DC (fits 12V vehicles)
9-30V DC (fits 12V vehicles)
9-30V DC ( 12V, 24V vehicles)
Waterproof Rate
IP67
IP67
/
IP67
IP67
IP67
IP67
High brightness: Advanced LED chips and clear PC lens, powerful and bright light beam, let you see the forward dark road clearly
Perfect combo beam: Excellent visual effect, spot beam for long distance illumination, flood beam for broad view area
Adjustable mounting bracket: The light bar can be adjusted to about 45 degrees, which makes changing direction of light beam easier
Superior quality wires: Good electrical conductivity, high temperature and melting resistant, outstanding bending performance
Package includes: 1Pc 126W combo LED light bar, 1Pc wiring harness and mounting brackets
Package include: 1Pc 126W Combo LED light bar, 1Pc wiring harness and mounting brackets
12 reviews for Nilight – ZH006 LED Light Bar 20 Inch 126W Spot Flood Combo Led Off Road Lights with 16AWG Wiring Harness Kit-One Lead, 2 Years Warranty
Add a review
$28.85
tkgibson –
Super bright, easy to install, and affordable!!
So far love the brightness, quality, and ease of install. I bought 2 lights kits to install on my utility tractor for winter snow removal front and rear visibility. I bought the light kit that included the wiring harness as it was the most cost effective and I was running both separately. Product notes say you can connect 2 lights to one harness, which is true, but those would have to be installed within 3 feet, which was not my case. So 2 lights can run on one harness, but know they need to be installed close to each other. I cut off the extra connectors and sealed to waterproof the wires.I bought a mount kit for the front. I needed to add longer screws to clamp to my front guard . I did not want to drill through the front steel guard at this time. May do that in future. The rear was mounted on the rollover frame and the holes I used were already factory made, so that was easy. The mounts on the light are adjustable and slide the full length of the light body. I ran the wire down the outside and secured with special outdoor zipties. The switches included on the harness are waterproof and light up when on, which is great addition! Once I drilled a hole in the plastic dash the switches snapped into the opening securely. Use a tapered bit as you can test the hole size as you go!! The switch had a quick connector so once that just fit through the hole I know the switch would lock in securely.Install was easy and has inline fuse built into the harness. All parts needed to connect are included, even extra fuses and connectors. I used heat shrink to seal all connections since they would be exposed to water and snow. Also, since I mounted the light upside down, I seals with caulk the area where the wire enters the light body, just to be sure. I recommend these to add a bright light to any application!
Londog –
Great value
This thing is awesome super easy set up. We put it on John deer tractor to do snow removal. Super bright almost too bright! Well worth the price!
Reese Apland –
Amazing and bright awesome gift for anyone!
Just as described bought it for my nephew to put on his truck and is amazing and bright! Very easy install a 16 year old did it himself! Photo attached is just the light bar on in the field!
Anthony N Jackson –
Excellent Mounting Hardware for Bull Bars
I installed this light bar and wire harness on my 2016 Jeep Wrangler. It mounted perfectly on top of the bull-bar brackets on EAG front bumper. The light is very bright, and the harness is well made. The install wound up taking me about three hours but would have only taken one hour for a smarter man. See the story below for a detailed description of my dumbassary.The Story Below: Getting the bar out of the way first…. Pretty simple—I just put on the mounting brackets like they appear they should be put on. Then, I set the brackets 12” apart (6” from center point of the bar) and the bolts slid right into the bracket points on my bull-bar. Easiest part of the whole install. The only even minor issue is that they supplied three extra washers and an extra screw which caused me to wonder if I’d missed something.I drove it around over some bumps and such to see if I could shake it loose but it held in place pretty well. I didn’t hook up the harness until I could set aside some time to do so.Good thing that! It took me a lot longer than I’d anticipated.I’ll start from the relay. I pinned the tab down on the insulation keeper post in the top PS corner of the engine compartment, and zip tied it to the existing harness for added stability. From there I made three ‘runs’ ; Battery, Switch, and Light-bar. I’ll tell you about them in order of increasing difficulty.Battery- Yeah, just put the red on the red and the black on the black.Switch- This leg of the harness has an inline connector and a toggle switch at the end. Starting from the relay, I ran it behind the existing harness using two zip-ties so that the connector winds up close to the DS corner on the other side of the engine compartment. I pulled the a-pillar inside cover and the DS dash end-cover off and ran the wire through a hole I found that let me snake the wire through the void under the hood cowling. This hole was filled with insulating foam, but I shoved a wire hanger through it and drug the harness (spade connectors attached) back from the engine compartment side into the cabin. I drilled a ¾” hole in the a-pillar panel—pushed in the toggle button, replaced all the panels and then went back to the engine side to zip-tie the harness to the existing harness and reconnect the connector. Weirdly, there was exactly enough wire to do this—makes me wonder if Nilight didn’t have this exact install in mind.Light-Bar- I just snaked this along the top edge of the PS side, and under the fuse box mounting bracket. Then, I undid the grill to get access so I could drop down to the existing fog light harness that goes to the bumper. I’m putting zip ties all along here about every foot or so—just to keep things tidy. The harness has two light connector branches and since I only needed one, I used electrical tape to seal up the first one, taping it to the harness for safe keeping.Now, THE FUN PART! – When I mounted the light, I drilled a hole in the bull-bar just under the DS mounting bracket. Since this bar is welded through the bumper, it’s open at the underside. “I can just snake the wires through that.” I thought. It’s like trying to shove a noodle through a straw!I abandoned the “shove it through” approach, then I abandoned the “pull it through with a coat hanger wire” approach and came up with the “hook-up-a-shop-vac-to-the-lower-end-and-suck-a-length-of- paracord-through-the-hole” approach. This worked so well that the first time I tried it, it snatched four feet of paracord out of my hand before I could kill the shop vac. I cut the spade connectors off and was then able to drag the connector wires up and out of the hole under the bracket. I connected them to the light with some of those melty solder butt-joint connectors, then slipped that back through the hole in the bull bar and sealed it up with some silicone sealer.I’d tested the harness and even hooked everything up to the light, so I knew it was good at that point, but when I flipped the switch—no joy. I checked all the connections, then realized there was an in-line 15 amp fuse…Yup—blown. I replaced it and blew it again just to make sure. I looked all along the runs for places I might have shorted it and was about to pull the A-pillar panels when I remembered that extra light connector I had taped up. Sure enough, I didn’t cut off the spade connectors there and had taped them together on the harness—creating a very solid and efficient short-circuit. Fixing this took about another half hour, but then It worked great.I’m not sure how many Lumens are generated by the Nilight – ZH006. It claims 126 W using 42 3W LEDs. I drove it out to a local area with an open field and totally ruined the circadian rhythms of about fifty Whitetails. It’s like driving around with a small sun on your bumper, in fact—if I ever accidentally shined this in another drivers eyes, I think an assault charge would be in order and I’d plead guilty with no contest.Nilight 20-Inch 126W Spot Flood Combo Offroad LED Light Bar & Wiring H – Nilight Led Light
PeterInCrosby –
I would buy it again.
I bought this light for the front of my 2001 EZGO TXT golf cart for two reasons. 1. To see better on the occasional off road excursion. 2. People in my neighborhood don’t like to turn off their brights when approaching anything that can’t blind them in return. LolPositives:The light seems well built.It is extremely bright.It has very broad coverage.The cords were long and heavy.It was relatively easy to install.Negatives:The switch connector could be better in terms of mounting. You have to cut the precise hole size and the add a notch on the side for it to slide in. It is held in place by the plastic being squeezed into the hole. It really should have a backing nut that tightens on.The mounting bolts that came with mine were not stainless steel. Since it will obviously be mounted in the weather, they should be ss.Finally, I had to add shims to get mine aimed level. This has more to do with where I mounted mine; however, I have used other lights in other applications that would have worked without any shims.As I said in the title, I’d buy it again, but it would take only 2 out of 3 “fixes” to elevate it to 5 stars.
William Greenlee –
Good for price
Got it today 08/15/25 and is hooked up and works great, the brackets are a little tricky and the wiring harness could be a little bit longer for the switch but so far it’s bright and seems good although one huge con is that it creates a very loud teapot like squeal that’s very annoying, will try to adjust positions and see if it goes away
Brayden Beyers –
Great light bar.
Great light bar, super easy to install and wire up! Super bright as well.
Adrian –
Excelente producto, llego antes de la fecha. Ilumina súper lo instale en una burrera y lo mejor que viene con el kit de instalación.
brb110 –
ممتااز جدا ركبته بنفسي جدا سهل التركيب ثبته على الدعاميه نيسان ارمادا وسافرت فيه 2400 كيلو متر ممتاازه الإضاءة تغنيك عن ليت السيارة 👌🏻
Nathan Voth –
Great product and easy to install. Would be nice if there was prions for mounting. Excellent clear light for night riding.
Jose Luis Ortiz Rivera –
Buena luminosidad
Rod Butts –
nice and bright!