CORSAIR AIR 5400 RS-R ARGB Triple-Chamber Mid-Tower Panoramic PC Case – 3X Pre-Installed Reverse-Rotor RS120-R ARGB Fans, Low-Noise, High Airflow Ducts, Reverse Motherboard Support – Black
$229.99
Related Products
The CORSAIR AIR 5400 features an innovative triple-chamber design that delivers exceptional cooling along with a radical new look for DIY PCs. It sports a dedicated 360mm radiator chamber, keeping the heat associated with CPU cooling out of the main chamber for improved thermals. The main chamber is also kept frosty with airflow ducts on the top-and-bottom fan arrays, which increase airflow velocity for chilly temps with very low noise. The wraparound glass exterior provides a stunning panoramic view, and the included reverse-rotor RGB fans offer powerful cooling with unobstructed RGB lighting for a PC that looks as good as it performs.
Triple-Chamber Design – Superior cooling performance is possible due to isolated chambers for the most powerful hardware including CPU, GPU, and PSU
Isolated CPU Cooling Chamber – Separate chamber on the front of the chassis holds a 360mm radiator for CPU cooling, ensuring none of the heat generated in the chamber affects other components
GPU and Motherboard Chamber – The central chamber is designed to offer massive vertical airflow to cool all the components thoroughly and then exhaust the hot air out of the chassis
PSU and storage chamber – A third chamber houses the power supply, storage, and cables, and it has its own dedicated intake and exhaust locations as well
Airflow Ducts – An innovative duct on the bottom fan array in the main chamber accelerates airflow as it’s forced into a narrow channel. This increases airflow velocity without requiring increased fan speed, improving cooling power without added noise
11 reviews for CORSAIR AIR 5400 RS-R ARGB Triple-Chamber Mid-Tower Panoramic PC Case – 3X Pre-Installed Reverse-Rotor RS120-R ARGB Fans, Low-Noise, High Airflow Ducts, Reverse Motherboard Support – Black
Add a review
$229.99
Kerwin –
Very Unique Design Allows for CPU and GPU AIOs (Measure Carefully!)
This case first came to my attention over the summer, but I didn’t think much of it until I had to put a new system together in November. The triple chamber design allows you to put your CPUs AIO into the third chamber which is sealed off from the rest of the system so that exhaust air never enters the other two chambers. The front mesh panel and top panel are sturdy and tool-less. The glass panels open easily, but the main side glass panel must be opened first before the front glass panel since it doesn’t have it’s own detente at the bottom. The metal panel on the right that gives you PSU access is also easy to pen.The case was very easy to work in and I enjoyed my build. This is compatible with BTF boards which I did use. The cable management features were excellent and let me keep things tidy.I wanted to use two AIO’s in this, one for the CPU and one for the GPU. I put the GPU radiator into the third, dedicated chamber, while the CPU radiator is in the top of the main chamber. My temps have been great. My 5090 has not gone over 65C while gaming for hours, my CPU (AMD 9950x3D) sits around 60 and below. My idle temps are incredible as well.Overall, I’m very happy with this case.
Stephen –
Pretty well designed case
It is a very well built case with an interesting design. The first AIO radiator I tried didn’t fit (not from Corsair) but the Corsair Nautilus fit perfect as it should. The bottom shroud is good and I do believe helps with airflow and temps but I’m not using the top shroud because I don’t think it does anything and it kind of look weird. It’s a big (wide) case so have the space. Very easy to build in but have the right AIO.
Amazon Customer –
Lowest internal temperatures! Absolutely love the case
Best case for airflow. GPU temperatures dropped from 70°C to 57°C separating the CPU AIO into its own chamber. Although it has a very tight fit for my H150i 360mm Corsair AIO it is as advertised.
SaltySeas –
Must buy!
Really compact, strong casing, and really big for accessories or vertical GPU.
Robert –
Really nice case
Real nice quality case
WeAreMad! –
Noisy and tricky to install the aio
The radiator chamber exhaust is completely open and the radiator fans get noisy (corsair RS120s). At full rpm, my old case was quieter (same fans). I’m still worried how opened this chamber is tbh.The plastic divider for the radiator chamber is trick to remove and install back. I couldn’t get the thumbscrew back in.The the cable pass through area below the mb is tight for thick cables like the 12vhpwr.The two plastic fan shrouds are annoying and I recommend removing then during the install process. Also, remove the big glass door and the rear psu door when installing ur hardware.I noticed a small temp drop for the cpu and the gpu does boost a bit higher, but overall I think this case doesn’t justify $230 entry price with the issues above.Skip the fans and the shrouds and $169-189 is more appealing imho.Going back to my Tower 600
Mario –
Geniales Gehäuse- die Optik ist spitze- Kühlung funktioniert einwandfrei- für Anfänger ggf. Etwas kompliziert und umfangreich
Cantic –
Boitier tres beau.
Oscar –
Todo Perfecto
saryosa96 –
見た目に惹かれて買いました。ミドルタワー（大嘘）ケースを名乗るだけあって高さはそこまでないのが救いか。GPUサポート付属はありがたいが、幅333mmのGPUだとそのままではファンブレードに明らかに干渉します。付属の追加パッドを使用することで干渉せず使う事ができました。CPUクーラーは元々ArcticのLiquid Freezerを用意していましたが、ラジエターがサイズオーバーで入らず泣く泣くCorsair TITAN 360に変更。メーカー次第で360mmでも干渉するくらいギリギリなので、各パーツはCorsairで揃える前提のケースのようです。クーラーの取り回しは、ホースの負荷も考慮すると画像のようなレイアウトが正解かと思います。CorsairがCOMPUTEXに出展した時もこのレイアウトでした。クーラーの説明書からは180°逆向きになります。フロントパネルのガラスの保護フィルムはYoutubeで見るとは剥がす人がいますが、内側のみ剥がすのが正解です。外側フィルムは破損時の飛散防止用となっており、ガラスそのままより若干指紋が目立ちますが、精製水を染み込ませたマイクロファイバークロスなどで拭き取ればいいと思います。エタノール等はフィルム素材によっては相性があるため避けた方が無難です。日本語のレビューでは誰も紹介していませんが、そのままではダクトを外さないとグラボの縦置きができない為、CorsairがPrintablesでダクト併用の縦置きブラケット図面を無料公開しています。他にも透明ダクトの図面自体も公開しており、STLを触れる方なら自由にダクトをカスタマイズ可能です。マケプレ出品のAIQA Marketから購入しましたが、運営はPCパーツの代理店で有名な株式会社アスクだそう。ぱっと見ただけでは中華の怪しい業者に見えるので、ストア名の後にアスクの運営と一言あれば、買う人も安心できるのではと思いました。発送自体は注文の翌日にはすぐに発送されていてとても良かったです。
Steef –
I thought it was going to be a slight exaggeration at how cool it keeps things, well under load my cpu and gpu stay cool, never goes above 55 Celsius (cpu AIO has a push pull fan configuration that barely fits in the side cooling chamber but it does with a little patience and fiddling, gpu mild undervolt with raised power limit). The only thing I’m confused about is where the supposed 10th fan would go it claims it can have, I mean I’ve forced 12 in with the push pull and doesn’t seem to need it either way with those temps but still it claims it can have one on the back? Sturdy, good looking, great airflow, lots of bits modular and removable to help with building and cables mostly hidden. Using 9800x3d with Corsair Nautilus and 6 fans in push pull, Sapphire 9070xt nitro+ with the three provided fans at the bottom set to turbo to feed gpu (rarely have to pick up speed though so they keep quiet) and top three fans set to standard.