CORSAIR 3500X RS-R ARGB Mid-Tower PC Case – 3X Pre-Installed RS120-R ARGB Fans, GPU Anti-Sag Arm, Fits up to 10x 120mm Fans, Reverse Connection Motherboard Compatible – Black
$119.99
Related Products
The CORSAIR 3500X RS-R ARGB Mid-Tower Glass PC Case offers powerful cooling and bold visuals in a clean, modern design framed by wraparound tempered glass panels. Three pre-installed RS120-R reverse rotor ARGB fans provide vibrant lighting and strong airflow, with easy lighting control through a standard +5V ARGB motherboard header. Its spacious interior supports large graphics cards, CPU coolers, and radiators up to 360mm for custom or all-in-one liquid cooling. Compatible with the latest reverse connection motherboards for a cable-free interior, the 3500X also includes a GPU Anti-Sag Stabilization Arm to support your graphics card, while double-shot grommets improve cable routing for a cleaner build.
A Great Build with a Great View: The 3500X has all the cooling benefits and essential features you need to build an amazing PC, supporting motherboard form-factors from Mini-ITX to EATX, with a wraparound glass aesthetic to give you the view to match.
RS120-R ARGB Fans – Enjoy high-performance cooling and unobstructed lighting from three RS120-R ARGB fans, with simple motherboard control via a +5V ARGB header.
High Cooling Capacity: Side, roof, and PSU fan mounting points, accommodating up to 10x 120mm fans, ensure that you don’t sacrifice cooling for the stunning looks of a glass front panel.
Removable Tempered Glass Panels: Easily removable front and side glass panels make it easy to build and access your system after it’s done.
Compatible with Reverse Connection Motherboards: Validated for use with ASUS BTF, MSI Project Zero, and Gigabyte Project Stealth motherboards featuring connections on the back of the board, so your view isn’t spoiled by plugged-in cables.
12 reviews for CORSAIR 3500X RS-R ARGB Mid-Tower PC Case – 3X Pre-Installed RS120-R ARGB Fans, GPU Anti-Sag Arm, Fits up to 10x 120mm Fans, Reverse Connection Motherboard Compatible – Black
Add a review
$119.99
Webtrance –
Nicely updated case from Corsair!
Very nice case though not the absolute best for airflow…. It’s more for show. This is the newer version with the reverse case fans which was $99 vs the on sale original case for $79. Get this one as the three reverse fans look so much nicer in the final build. My 5080 is large, so adding two fans on top of the PSU box, underneath the GPU is a tight squeeze and doesn’t offer any more “cooling airflow” in my opinion. I did install an additional intake fan beneath the 3 vertical side intake fans but it doesn’t seem to cool the case beyond what the default fan configuration does. I wouldn’t add additional fans honestly.
Justin –
Great case.
Love the case and how easy the panels come off and go back on. Only negative thing I can say about it is the same I can say for all modern cases. I wish they were a tad bit thinner.
Zachary Rock –
Good but kinda frustrating
Great case, the only issue I have is that the reinstalled fans don’t come with anything for the rgb to be controlled by. If you want that you need to buy a commander duo because they changed the ARGB connectors to block off the third pin
Starlin Stephens –
Great case!!! Highly recommend
Good quality lots of room!
Eascen –
Big fan, so much room and extremely well designed.
I absolutely love this case, was such a great purchase.
Que –
Nice case
I really like it.
Placeholder –
Dented
Item came dented; sent back
Chatty –
aesthetically pleasing. Loads of space for cable management and cooling.
LAURENS Pierre –
Oui conforme , mais attention à bien vérifier l’état de l’emballage avant réception, c’est important de le faire .
J.J. –
Very easy case to build in, the fron and sode glass panels come off leaving thos case wide open to build in.Rear frame panel has ample provisions for running cables.Concealed bottom venting psu compartment, and can fascilitate any atx power supply.3 case fans supplied with hardware and proper cables to daisy chain pwr and argb. No Fan Hub, so be sure that your MOBO can handle the power requirements for a daisy chained sut up.Case I/Os convenient wired to a single plug to the board.Non Adjustable Solid heavy duty Feet, provide solid antislip, and gives sufficient lift to allow cool air intake from the bottom.CORSAIR 3500X RS-R ARGB Mid-Tower.All standoffs were securely inplace, standoff placement alignment for board aligned accurately.Plemty of room for large GPUs, this case has no problems taking any rtx 5090.360mm AIO top mount and back mount, No Front Mount option.Tons of room for custom Liquid Cooling (if that your thing.)Fine Mesh Dust Filter are very nice on this unit, bottom is a tray style, amd pulls out and slide back in nicely. Top Filter is magnetic, and fits like a glove.Cons:There is not much options for 140mm fans, although it claims to accept them, the only place mount ready for 140mm fans is on the top or the space on the nack where a Radiator wpuld go, so that is somethimg that I have a concern about. I might see if I can mount one underneath, but I doubt it will provide the ideal air pressure I am looking for.The 2 glass panels can knock together, something that I will look into after I’ve finalized the build. If it’s a concern, I will fabricate a custom rubber seal to prevent any risk of the glass chipping or breaking.Top Panel mounts conveniently, bit it also comes off if you pick the case up, not necessarily a Con, just need to remember that itis not solid and needs to be picked up differently.Conclusion:Great Case for anyone who want to build their first rig, the case opens up very nice and allows lots of light and room to work in.I would take measurememts and be sure that the largest of PSUs will fit, other than that, there really are no negative surprises to encounter, as far as hardware, this case is large 10.5″ wide X 19.5″ Long can’t remember how tall but 20 to 22inches high.The case is light, respectively.Esthetically, it looks clean, overall nice Showcase Display ATX Mod-Tower Case.Corsair put a lot of good thought into thos one.
Tanja Wald –
genau wie von Corsair erwartet + die beste Preis Leistung
MaMat –
Boitier très esthétique, bien agencé.Caches en caoutchouc bien pratiques.