Thermaltake View 380 TG ARGB Black ATX Case; 4x120mm ARGB Fans Included; Supports Hidden-Connector Motherboard; Front & Side Dual Tempered Glass Panel; CA-1Z2-00M1WN-00; 3 Year Warranty
$69.99
Related Products
Experience the ultimate in PC customization with the View 380 TG ARGB Mid Tower Chassis. This innovative dual-chamber ATX case is designed to seamlessly integrate with Hidden-Connector Motherboards from ASUS and MSI. It features four stunning Hydraulic Bearing 120mm ARGB Lite Fans that illuminate your build with vibrant, customizable lighting, fully compatible with software from ASUS, GIGABYTE, MSI, and ASRock. The View 380 TG ARGB isn’t just about aesthetics—it offers unparalleled flexibility for cooling solutions. Accommodate up to ten 120mm fans and install up to a 360mm radiator on the top and a 280mm or 240mm radiator on the right side. Build your dream PC with the freedom to optimize airflow and cooling exactly how you want it. Transform your setup with the View 380 TG ARGB Mid Tower Chassis—where performance meets spectacular design. •P/N: CA-1Z2-00M1WN-00 •Model: View 380 TG ARGB •Series: View •Case Type: Mid Tower •Dimensions: 410 x 285 x 442 mm (16.14 x 11.22 x 17.4 inch) •Weight: 6.93 kg / 15.28 lbs. •Color: Black •Material: SPCC •Cooling System: Right(intake):120 x 120 x 25 mm ARGB Lite fan (1000rpm, 22.3 dBA) x 3 ; Rear(exhaust):120 x 120 x 25 mm ARGB Lite fan (1000rpm, 22.3 dBA) x 1 •Drive Bays: 1 x 3.5”, 2 x 2.5” •Expansion Slots: 7 •Motherboard: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX) •I/O Port: USB 3.0 x 2, HD Audio x 1 •PSU: Standard PS2 PSU (optional) •Fan Support: Top: 3 x 120mm, 1 x 120mm, 2 x 140mm, 1 x 140mm ; Right: 3 x 120mm, 2 x 120mm, 1 x 120mm Rear: 1 x 120mm ; Bottom: 3 x 120mm, 2 x 120mm, 1 x 120mm •Radiator Support: Top: 1 x 360mm, 1 x 240mm , 1 x 120mm, Right: 1 x 240mm, 1 x 120mm, 1 x 280mm, 1 x 140mm ; Rear: 1 x 120mm ; Bottom: 1 x 360mm, 1 x 240mm, 1 x 120mm •Clearance: CPU cooler max height: 160mm ; VGA max length: 415mm ; PSU max length: 200mm
Dual chamber case with pillarless front & side tempered glass panel.
Compatible with Hidden-Connector Motherboards.
Four Hydraulic Bearing 120mm ARGB Lite Fans pre-installed.
I/O Ports: Gen.2 USB 3.2 Type-C x 1; USB 3.0 x 2; HD Audio x 1
Max Radiator Size: 360mm & Max VGA Length: 415mm
10 reviews for Thermaltake View 380 TG ARGB Black ATX Case; 4x120mm ARGB Fans Included; Supports Hidden-Connector Motherboard; Front & Side Dual Tempered Glass Panel; CA-1Z2-00M1WN-00; 3 Year Warranty
Add a review
$69.99
Mark Olchanowski –
Great case, with a few limitations, read further.
Great case for the price. This is my fourth time building in this case, so I feel like I have some experience to share. First of all, she is a looker. The supplied fans add value. Be aware there is no RGB controller built into the case, so you will need your Motherboard to have an aRGB controller header, or buy an aftermarket one. Second, it checks all the boxes, has room for storage expansion, and holds large modern GPUs. Thirdly, While it holds the square mATX sized Mobos, it really looks best if you use slim mATX mobos. Airflow is great. Plenty of room for a 240mm AIO water cooler. It does feel very lightweight (cheap?) But once all the components are installed, it stiffens right up. Also both glass panels are removable which makes it easier to work inside the case. It has plenty of anchors for zip ties to keep up with tidy cable management. A small gripe about the case is it does not have USB-C, but instead opts for USB 2.0. It sort of dates itself to the previous decade. I did not bother to read instructions because
Amanda Bakke –
The best case I could find and i’m not disappointed!
I am absolutely in love with this case! I cannot speak for water cooling since I have not set my pc up that way.The case is massive… it really is big. I was blown away when they delivered the box. Packaging was fine. Unpacking was easy.It is HEAVY, but if you remove the glass, which is very easy, it’s like half the weight or less. So when I want to tinker, I take the glass off where it sits, then move it. The sides are set on hinges. You take out the two screws and open it like a door, then lift it off the hinges. The little things impress me the most…. The attention to detail! The top pin is a little longer than the bottom pin.. so you can set the top pin in the hinge a little, and then line up the bottom. This is ingenious because one could spend all day trying to get them both to line up at once. The top and front glass are held in by the attractive screws.The glass is thick and durable.. you are not going to break or scratch it. The screws that hold the glass on are nice, black so they blend in, and have rubber washers.I remember reading a review that said the space between the case and the glass was not big enough for adequate air flow. That is totally a lie. I don’t know if that was a fake review from a competitor but there is plenty of air flow. I would know. I have 13 fans in my case and I count the power supply fan because it is drawing air from in the case and blowing it out the back.Ideal fan placement: (3) 120mm in the front, (3) 140mm on the top, (1) 140mm on the back, (3) 120mm on the cpu radiator cooler and I managed to get (2) 120mm fans on the bottom.The radiator: Sits in the case, in front of the motherboard, on the right side. The radiator and fans may sit on the top, I did not try. This mount comes completely off which is nice for installation purposes. Take it off, install whatever, then 4 screws to put it back. I opted to put my radiator on the inside right panel because of 2 reasons; 1: I wanted those fans on top, 2: that’s how it was done in the installation video I looked up. It is a Thermaltake case and I did buy a Thermaltake cooler and it all lined up nicely. Almost like it was made for this case! All my fans are Thermaltake as well.The radiator goes all the way to the bottom of the case, so I had to move a fan some to make it work.. not ideal since it’s offset and not totally on the grate with the holes, but it’s there and still pulls in air.Options: This case has many options… if you don’t have a cooler, or a batman figurine to put in the case (front) you can use the hard drive modules that come with it. I opted to take mine out and use the mounts on the other side (right side) of the case. Very handy and gets them out of the way. Less clutter, more air flow. Also comes with a mount for the video card if you are liquid cooling, also removable.Lets talk about cable management. There are plenty of places to run these cables.. including holes with rubber washers at the edge of the motherboard mounting area… so you can run the cable in and attach it right where it sits. Holes across the top every so often so you can run cables directly from the fan to the hole and not along the inside, across the case, just to find a hole. You don’t have to run the cable across anything.I had issues with the board and the radiator… I couldn’t attach my front USB 3.0 ports… this was unacceptable so I installed a PCI USB 3.0. Added (5) USB 3.0 to the back and I got my front USB ports back since this piece of hardware had 2 additional ports in the front. The bad part about this is, there are more cables and the PC looked so much cleaner before I installed that. Oh well… can’t win at everything all the time. Maybe I could have found a cable that had a “L” in it and made it work, but I wanted the extra USBs on the back anyway. The best motherboard you can get doesn’t have enough lol.The right side of the case: 3 places to mount HDD, and ample room to stuff all your cords you don’t want to see. I have (3) RGB fan control modules back there along with all the cables for the fans and one HDD. It’s crowded.. but a perfect place to hide all those cables.It has a top, front and bottom dust screen.. THANK YOU Thermaltake!This case is the perfect home for my MSI MEG Godlike motherboard, i9-9700k processor, 1080ti graphics card and all glorious fans moving all the air I want. I need it with the overclocking.This is the best and the last case I will ever buy. Thank you Thermaltake for making such a well thought out product so perfectly.
Sam –
Great compact case, easy to work with
Great case, looks awesome and is easy to route things cleanly in.I replaced all the fans with Noctua ones that I had so can’t directly comment on the fans/case air flow since I modified that.Only other consideration was that my AIO was too large (probably my fault for not reading). That said… I was able to make it work fine using zipties, though there’s some air flow blockage for sure.
GarlicBreath88 –
Minor “could-be-betters”, Overall very aesthetic and good buy
Pretty decent micro ATX case. Couple of minor complaints: 1) There is no space at all between the motherboard and the fans, so the 24 pin and front panel cable has to go down instead of around the side. 2) The stand-offs didn’t line up super well with my B550-M motherboard, so I wasn’t able to screw in like half of the screws to mount the motherboard. Aside from that, it’s a very aesthetic “fish tank” case, and I’m still happy with the look of it! CPU temps were good and there’s plenty of airflow. Also, very random, but I find the springy deep click of the power button very satisfying.
Chill Will –
Great PC Case to Build, Many Features
I usually never write reviews, but I was blown away by the design and overall finished product that I felt inclined to share my experience. This is a very versatile PC case IMHO, great for both those stepping into the world of PC Building and Seasoned PC Builders alike. Initially the look alone is what lead me to give this TT View 380 a try as I was wanting to upgrade my case for a cleaner overall look, but I received much more. This case is well worth the price ($99.00 at time of this review), no doubt about it. It features support for the forthcoming BTF Hidden connector design for those who want to be ready for the direction that Motherboard manufacturers are headed in, as well as Hideaway PSU mounting support behind motherboard, interior rubber grommet access for feeding 24v MOBO connector, SATA and other MOBO cables. I went with a top mounted radiator configuration. The SSD/HDD tray allows for support of 1 HDD and 2 SSD easy mounting with enough room for cable storage behind. The 4 pre-installed fans is great, add those with the 2 fans for my radiator and I am starting with 6 fans all synced beautifully together with support for 3 more on the bottom due to the decision to move mounting of the PSU behind the motherboard.If I had to find a con, it would be the pop out PCI-E port brackets. I personally would prefer these to be removable and able to be removed/replaced based on ones need. Also, I do have a rattling noise from my radiator fans that I am still trying to figure out if it is my AIO or an issue with the mount support, as I did not have this issue in the case I just moved from. Still testing and will update once I figure out what is really going on.Overall: Awesome Case, Beautiful Case for a Great Price Based on all the features. This has definitely opened eyes and I even have friends ordering this exact case. Great Job Thermaltake!!!!
Travis –
Keeps everything cool. Excellent gaming case
Edwin Cortes Rivera –
Muy bueno
DuffTech –
Great value. NICE LOOKING CASE!
Birdy –
The case is beautiful but I have one issue pictures don’t show power supplies when they are clearly viewable and glass panels hinges screws over tightened otherwise no complaints about it yet
Mandee –
LOVE. It’s definitely a micro micro case haha. My motherboard is a little bigger than the case would like and sits over the fans ever so slightly. But all in all LOOOVEEEE the cotton candy bubblegum pink and baby blue inside it