GAMDIAS ATX Mid Tower Gaming Computer PC Case Tempered Glass, Built-in 4X 120mm ARGB Case Fans, Front Airflow Mesh, Up to 6x120mm Fans, 340mm GPU/VGA, 360mm AIO/Radiator, 160mm CPU Cooler

Really good case for the price and feature
I was very pleasantly surprised with the quality and look of this case in relation to its price. It is well laid out, easy to build in and looks really nice all together. The big 200mm fans in the front are ARGB and have a button the case as well as an ARGB header that can be used to control the colors. They are fixed speed but move enough air for that not to be an issue and are very quiet. I had some concern that temps would be an issue with the glass front. The sides are open and there is plenty enough room for those fans to pull in cool air. The fan at the rear is a no-nonsense standard type fan that can be speed controlled by the motherboard header.I would recommend this case not only from a price perspective….and I am not sure how they do it but it comes off seeming of a higher quality than the price point. The edges and whatnot on the inside are well finished, not sharp. No issues with my hands during the build. The only detractor was that it was missing one of the standoffs for the motherboard. I had more on hand but it would be an issue if you didn’t have more available. All in all one of the better case purchases I have made.

Case Is Perfect For Very Long GPU’s and Very High CPU Tower Coolers!
I wanted a wide case that had 200mm fans pre installed. This one fits the bill perfectly. The two 200mm fans in front spin quietly. They are direct DC voltage control so fan speed cannot be adjusted unless you connect the fans to a fan controller. The rear pre-installed fan is not PWM either so I replaced it with a high quality PWM fan and installed more 120mm PWM case fans. You really need to fill all the other fan slots to pull air out of the case. The two 200mm front fans bring in a lot of air. The case LEDs are controlled by a small button on the top front of the case. USB 3.0 jacks on top of the case as well. The tempered glass door is really nice and is real glass. Not junky plastic. I installed a full size ATX motherboard in it and the very big XFX 6900XT video card. It fits with ease. Another reason I selected this case for my build was since it’s so wide I was able to easily install a very high CPU Tower cooler with no restrictions. All in all this case is fantastic for the price! Highly recommend this case to any PC Builder.

Good, cheap PC case with good thermals, but has cheap build quality.
The case is good and sturdy, but there are some things to note. Without computer components installed, it is REALLY light. The front cover over the triple fans is also made cheap plastic. It’s no surprise that the fans are also plastic, but one of my fans’ plastic frame broke, but it still works when it’s screwed in. Note however, the top front fan is inverted by default and exhausts air, so you have to open the plastic front panel to switch it around if you want. And do this FIRST before installing computer components.Cable management is only okay. The back side panel feels very thin and flexible, even if it’s made of metal, and it shows a small buldge if you shove all of your cables into the back. There is however ample room to stuff cables under the metal box next to the power supply.The screws are also not exactly ATX standard, since I confused myself and used the wrong screws from a different ATX case. Just make sure to read the instructions and use the correct screws that come with the case.On a more positive end, the RGB does look nice, and the fans have an option to be plugged into your motherboard or just left on their own. You can also change the RGB lighting with the extra button next to the power button.There is also LOTS of airflow so I don’t worry about anything getting over 75°C. It does come with a magnetic mesh for the top and a removable mesh for the PSU at the bottom, but it won’t be incredibly effective at keeping out dust.Overall good budget case. It feels cheap and has some plastic parts, but if all you want is a cheap case with good thermals, this is a decent choice.

case molto bello spazioso sono rimasto molto sodisfatto

Gut verarbeitet und entsprechend auch schick. Für diesen Preis ein top Angebot.Was aber nicht erwähnt wird, ist was ganz BESONDERES:- das Gehäuse hat einen eigenen ARGB-Hub eingebaut und komplett verkabelt- ein eigener Schalter vorne am Gehäuse, daß direkt mit der RGB-Hub verbunden ist- das Gehäuseknopf ändert die Farben und schaltet auch die RGB-Beleuchtung aus(man benötigt kein RGB-Fähiges Mainboard)- der Hub kann aber auch mit dem Mainboard verbunden und darüber gesteuert werden

Sehr schönes Gehäuse. Lüfter waren bereits vormontiert und funktionieren tadellos.Lieferung war schnell, der Artikel war gut verpackt