FOIFKIN F1 PC Case – Pre-Installed 6 PWM ARGB Fan, ATX Mid-Tower Gaming PC Case, Type-C,360mm Radiator Support, FOIFKIN (Black, F1)

Extremely nice Fish Tank style case
I want to start off my review with saying I have always been skeptical about these cheaper cases. So going into this with the price point I was not expecting a lot. Now after saying that I will say that I was extremely pleasantly surprised. So let’s break it down.Pros:The hole placements for cable management and access to the points of the board are well thought out. Even for my very old PC with a very clunky large plugs it worked very very well. The way that the fans are daisy chain together made it very easy to get them plugged up into a single access point. I get really irritated with having to plug multiple fans into multiple points and then when you’re controlling the colors having to remember which one is which is one is which. There is tons of room on the underside of the case for the excess cableing coming from the power supply. The external drive bay underneath worked out very very well because I do have one of the old hard drives. I do like the mount for the solid state drives which I have two of them on the back. Everything just went together well inside the case. The clear portion of the case is actual glass and not that cheap Crystal plastic that scratches really easily. In the case itself is actually not that heavy. Also the ventilation for pulling air in is clear to where it can get good air flow. Once you get the correct fan controller installed which I have an MSI board so MSI already has a software suite for controlling lights and fans. The fans are actually very very quiet. Hardly noticeable.Cons:They tout this case is having a large open area on the back for cable management which it does not. You’re limited on how you can run your cabling. And with the way the fans are Daisy chained you’re also not able to run the fan cabling to follow the rest of the cables. You’ll find that you have a single cable that runs downward at an angle across the back of it and there’s no way to move it to blend it in with the rest. The front AIO which is actually located on the top on the board it has them set in the individual pins which is a bit disappointing because most modern cases now have the positive negatives in single plugs or in one large configuration that already matches up to the motherboard . I think we can seriously get away from the individual Rod plugs to go for the power and the reset features . The packaging was a bit to be desired because it has feet on it and one of the back corners got hit during transport and it was a slight Bend where the PSU mounts. However it being thinner metal was easy to bend back and get it all balanced and leveled back out. But again it was a little bit disappointing. The fans at low speed do have a bit of a surge sound to them. But again it’s hardly noticeable. Another thing that is a bit of a complaint is for solid state drives it only comes with mounting the maximum of three and I have seven in my collection. But it worked out because currently I’m only using two. At this point I should probably get a solid state box to mount them all in and operate them that way. I just haven’t done it. The hardware kit that it comes with has all the screws needed that you do not need to take anything from an old PC if you’re switching cases. Which that was nice because I bought a cheaper case a while back and then had to cannibalize parts from an older case. I will tell you when you get it if you have a full ATX motherboard you will need to add two more studs which are included in the hardware box.Overall for the price point of the case how easily controllable the fans are both light and speed and the fact that the case is solid. With actual glass and not that cheap plastic even at this price makes this case well worth it. I highly recommend anybody especially now with today’s computer part prices looking to trim a couple dollars here and there off of their total budget to seriously give this case a chance.

Highly recommend budget case for high end builds!
Awesome budget case for high end parts/builds! Lots of fans, good argb, good air flow. Low noise, good cord management. No complaints. Good for beginner builders too lots of room

I love this case!!!!!!!
Delivered in perfect condition.6 fans and tempered glass panels make this a great value.The case metal is a bit flimsy so care must be taken when insetting the rear panel insert. The thin metal can be viewed as a benefit because it is lighter or as a design flaw because it is less study. Since this won’t be used in my survival bunker, I appreciate the lighter weight to offset the weight of the glass panels.The case is roomy and the MicroATX board fits with tons of space to spare. Only complaint is that there was no way to have a standoff for the back middle mounting hole. Other cases come with a little sticky foam block for such situations to support the board when connecting the ATX plug. so be careful and support the board underneath with your fingers when plugging in the connector there. Actually you should do that anyway on allIt took about 15 minutes a spare old board, power supply and graphics card. Tested and then another 5 minutes to tie down the wires and close up. I did have an issue where one fan was barely spinning but after checking and making sure all the connecters were secure it started working so probably just knocked a connecter partially loose.Sitting on the desk, it looks like a $1,000 system, hard to believe it was just spare parts and basically the cost of a family trip to a fast food restaurant.

Great case
I love the case and the fans it came with. Adequate space to work with. You may have to take a fan off the chassis to put the motherboard in. Other than that, everything works great!

This case is PERFECT. I used a lot of cases in my life but this one is just too good but at this price it’s even better! It comes with 4 fans (3 reversed and 1 normal in the back). I liked it so much that I bought a second one (for my friend). Planning to buy another one soon. I really recommend it. (I’m not sponsored by the company by the way.)

Works great. Nice looking and solid design. Satisfied.

Amazing case if you’re on a budget. Good quality for the price and everything is easy to work with.