BenQ BDH01 Dual Monitor Arm -Gas Spring Monitor Stand for 2 Screens Up to 35” & 44lbs, Heavy Duty, Quick Installation, No Sagging, Top Clamp and Grommet Base, Reinforcement Plate, VESA 75×75 &100×100

Expensive and bulky but great for the requirement
Challenging to setup but works great. I used the steel reinforcement plate. The instruction manual shows the plate with an image of it sitting flush, I don’t think that’s possible to achieve with the steel plate, maybe on a desk with less height. From the picture it looked like my desk supported the arm despite not being solid wood, but I didn’t risk it.Outside of that tedious but easy setup. My monitor already had some vesa screws, so I had to unscrew those and put in the included plate. The included plate did not snap into my monitor so if you don’t hear a snap sound you’re still fine, you just put in the small hand screw and I’ve had no issues.There’s also a 180 degree and 360 degree optional adjustment, in case your monitor arm will be close to a wall. I used the 360 degree even though I’m close to a wall.I haven’t figured out how I’m going to disassemble this when I move so expect to take most of it apart again.As for the resistance screws, less is more. So be careful even the slightest turn greatly increases or decreases tension.The arm itself is super sturdy, looks great, feels great.It saves a decent amount of space under the monitor but with the reinforcement plate it’s definitely a little bulky. This is also expensive so not great value, but more a premium product for monitors you really care about.I wouldn’t use this on anything below 27″ I would go with a cheaper option. Also if you like flexibility of adjustments get 2 individual arms instead of a dual arm mount. This way you can space them apart how you like perfectly.The 3 year warranty from benQ here is WEAK. Stand behind your product with a 10 year warranty. benQ has always been cheap on warranties.Anyway, not sure if this is OEM or not, but it’s definitely a solid monitor arm and I’m happy to use it on my 27″ gaming monitor. I also bought a cheaper 2nd arm for my work monitor but have yet to install it. Buying two of these would be pretty bulky and expensive. There’s definitely lower profile arms out there but this one supports much heavier weight and sizes so that checks out.The included cable routing is VERY hard to use if you have MORE than 2 cables on your monitor. For example a lot of users have power and then DP, but if you add another DP or HDMI then it struggles for space ESPECIALLY with the newer DP 2.1 cables and 54gbps+ those cables are THICK due to the increased bandwidth (or at least that’s what I think) and it was very hard to route.Also ensure your cables are long enough using the included routing takes a big chunk of slack away from the cable, I had to buy a 9 FT DP cable to reach my PC.

Strong build
Very sturdy and high quality. I love the it doesn’t have the bottom clamp so it’s a lot cleaner looking and easy to install. Also it’s a good future proof arm for when I want to get a larger monitor in the future since it can hold up much heavier monitors.

Well-designed arm
I’ve had 3 sets of monitor arms. All of them have been decent. This one is spendier than the others I have purchased, but it is a very nice arm. Sturdy & easy to use. I paired it with the BENQ 28.2″ coding monitor and am using it in a single monitor setup, instead of the (2) 24″ smaller monitors I used to use.

Good quality and very sturdy
Early days, but fixing it up was easy, product seems to be of good quality and very sturdy, I have a 8 year old 34 inch monitor which is quite heavy (17lbs) and till now it’s holding on.

耐荷重20kgの安定感は抜群で大型モニターもピタッと止まります。補強プレートが標準付属するため追加出費がなく高コスパ。ゲーマーなら間違いなく買いの製品かと思います。

スマホ首改善のために買いました。補強プレートはかっこ悪いです。BenQのモニターに付けたのでデザイン的に違和感がありません。テーブルの裏側の形状のため端迄つけられませんでした。元々のモニタースタンドの中心に穴を開けました、9cm左にズレました。

高いだけあって丈夫だと思います。ただ組み立てが面倒！そして重い！丈夫な机に設置してください！